Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Mount Washington
Fireplace repair in Mount Washington usually starts with a question you can’t answer from the couch: is that smoky draft a damper that won’t seat, or a flue that was never lined for the insert someone installed in 1998? We work on the hillside homes here often enough to know the answer rarely comes from looking at the firebox alone. It comes from a camera run up the flue, and from someone who knows what 1920s brick and original clay-tile liners look like after decades of oak and eucalyptus smoke. Call (855) 506-8977 and we’ll get a technician out to look.

Why Mount Washington Homeowners Call Chimney Sweep Eagle Rock for Fireplace Repair
Our technicians have up to 14 years of experience, and a good share of that time has been spent on the steep, wooded lots that define this neighborhood. That matters here more than it does in flat parts of Los Angeles. We’re a dedicated chimney company, not a generalist who adds a brush to the van, and the same technician who inspects your flue is the one who repairs it – no diagnosing here and handing the work to someone else.
We work with professional-grade material lines the trade trusts, including Copperfield and HeatShield, so when a damper needs replacing or a smoke chamber needs parging, the parts match the job. Response time to Mount Washington is fast because we know these streets. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re near Canon Crest or up off Moon Avenue, we know the parking situation before we arrive.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Mount Washington
Most of the repair work we do in Mount Washington falls into four categories, and all of them start with a camera inspection so you see what we see before anything is quoted.
Gas Fireplace Repair
Many Mount Washington homes have been updated with gas inserts, and those still need their flues checked. We repair pilot assemblies, thermocouples, and gas valve issues, and we inspect the flue the insert vents into – because a modern appliance retrofitted into an old unlined stack is one of the most common failures we find on these hillsides.
Wood Burning Fireplace Repair
Original masonry fireplaces in 1920s and 1960s Mount Washington bungalows take a different kind of care. The mortar in these fireboxes is often fragile, so aggressive cleaning can spall the joints and open gaps that let heat and creosote reach framing. We repair cracked firebox brick, rebuild mortar joints, and restore draft without hammering on brick that’s already compromised.
Fireplace Insert Service
Insert work is where Mount Washington’s housing stock really shows its age. A gas or wood insert installed into a flue that was never sized or parged for it produces poor draft and condensation damage in the smoke chamber. We service inserts with the fit and venting they actually need, and we tell you plainly when the existing setup can be corrected and when it can’t.
Damper Repair
A damper that won’t seat is often the real reason a fireplace smokes into the room. Santa Ana wind exposure and wet winters crack crowns and caps, letting water down the flue to rust the damper assembly. We repair or replace dampers and confirm they seal before we close the job, so your next fire in the Mount Washington hills actually draws.

Trusted Brands We Service in Mount Washington
We use the same materials the industry’s top manufacturers supply to certified professionals – brands like Copperfield, HeatShield, and DuraFlex. That means when a flue needs a new damper, a parged smoke chamber, or a reline, the parts going into your Mount Washington chimney are the ones specified for the job, not whatever’s closest to hand. If a repair calls for HeatShield resurfacing of a deteriorating flue, we do that too, which is work most sweep-only services can’t offer. One call covers inspection, cleaning, and repair – the same team handles it start to finish.
Common Fireplace Repair Problems We See in Mount Washington Homes
Mount Washington’s chimneys sit in a Very High Fire Hazard Severity Zone, so creosote and spark-arrestor condition get checked here as year-round wildfire-defense items, not just winter-comfort concerns. The housing stock runs 1920s to 1960s, and many stacks are unlined brick or original clay-tile flues that are fragile enough to rule out aggressive rotary sweeping. In a typical Mount Washington repair, a homeowner with an older masonry fireplace notices a smoky, weak draft or crumbling mortar inside the firebox, and a camera run up the flue shows the real cause: a cracked or spalled liner, a rusted damper that no longer seats, or a smoke chamber never parged for the appliance now vented into it. A qualified local pro relays the camera footage to the homeowner, then repairs the damper or firebox, re-parges or relines the flue, and confirms draft before closing up.
- Fragile 1920s brick mortar. The joints in these fireboxes are already brittle, so aggressive sweeping can spall them and open gaps that let creosote or heat reach combustible framing. Gentle hand cleaning protects what decades of live-oak smoke have already weakened.
- Gas inserts in flues that were never built for them. Retroffitted gas or wood inserts into unlined or clay-tile stacks are common on these hillsides, and they produce poor draft and condensation damage in the smoke chamber when the venting isn’t sized correctly.
- Cracked crowns, caps, and unmaintained spark arrestors. Santa Ana winds and wet winters crack crowns and caps, letting water rust the damper while spark arrestors go unchecked in a high fire-severity zone. Both are wildfire-prevention items here year round.
- Steep-lot access complications. Narrow, winding streets like Canon Crest and Moon Avenue often mean parking far from the house and hauling equipment up steep driveways or stairs. We plan for it, and it’s one reason the technician needs to see the roof before promising a timeline.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Mount Washington, CA
We quote fireplace repair per job, and the written estimate sets the final price. Typical estimates for Mount Washington run like this: a damper repair or replacement usually falls in the $180 to $450 range, firebox mortar and brick repairs run roughly $350 to $1,200 depending on how much spalling there is, insert service and re-venting typically lands between $400 and $1,500, and HeatShield liner resurfacing on a deteriorating flue starts around $1,800 and goes up from there. What moves the number is the condition a camera shows – not a guess from the hearth. Nothing is recommended without camera evidence you can see for yourself, and if the work can safely wait, we’ll tell you. Estimates are free. Call (855) 506-8977 for an exact quote.
We Also Serve Cities Near Mount Washington
Mount Washington shares its hillsides and its old housing stock with the neighborhoods around it, and we serve them with the same approach. If you’re in Glassell Park, Atwater Village, Highland Park, or Eagle Rock, our fireplace repair team covers those areas too – the same camera-first diagnosis, the same quality-sourced parts. Wherever you are in or around Mount Washington, one call covers it: inspection, cleaning, repair, and protection. You can read more about the full scope of our fireplace repair work.
Serving Mount Washington, CA – Our Local Coverage Area
We serve Mount Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Mount Washington
It needs a camera inspection before anyone decides – a sweep alone can’t tell you whether the mortar is sound. On these 1920s builds, the joints are often already fragile enough that aggressive sweeping can spall them open, so we run a camera first and show you the condition of the brick and liner before recommending anything. Call (855) 506-8977 to book that inspection.
Yes. A gas insert still vents into the flue, and an old unlined or clay-tile stack that was never sized for it can produce poor draft and condensation damage even with no wood fire. Annual inspection catches that before it becomes a structural repair. Call (855) 506-8977 to schedule.
A Level 2 inspection runs a camera through the entire flue to check the liner, smoke chamber, and joints – not just the firebox. You need one after buying an older home, after an appliance change, after a chimney fire, or any time a Level 1 inspection turns up something that needs a closer look. Call (855) 506-8977 and we’ll recommend the right level.
It’s often both, and the damper is the first thing to check. On Mount Washington’s windy hillsides, cracked caps and crowns let water rust the damper so it won’t seat, and a smoke chamber that was never parged compounds the draft problem. A camera inspection tells us which it is. Call (855) 506-8977 for a free estimate.
They affect access, not the quality of the work – narrow winding streets and steep driveways often mean parking far from the house and hauling equipment up, and multi-level rooflines and adjacent trees slow the setup. We plan for that before we arrive. Call (855) 506-8977 to schedule your visit.
Schedule Your Fireplace Repair in Mount Washington
If your fireplace is smoking, your damper won’t close, or that old brick firebox is showing its age, start with a camera inspection you can see for yourself. We’ll tell you exactly what we found and exactly what it means – no pressure, no guesswork. Estim||DSML|| parameter>