Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across South Pasadena
A cracked crown or a loose cap lets water into the one part of a South Pasadena house that can’t dry itself out: the brick and mortar of the chimney. We handle chimney cap & crown work for the older homes here, and we tell you what we found before we quote anything. Most South Pasadena calls we take are on 1900-1930 houses with the original chimney top, so we know the shapes, the mortar, and the way they fail. Nothing gets recommended without a camera image you can see for yourself. Call (855) 506-8977 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why South Pasadena Homeowners Call Chimney Sweep Eagle Rock for Chimney Cap & Crown
We’re a dedicated chimney company, not a handyman with a brush and a ladder. That matters on a 1920s chimney, where the cap, the crown, the flue and the firebox are one system and a fix on one part changes the rest. When we inspect, the person who diagnoses is the person who repairs, so you don’t wait on a second opinion from another contractor.
We work with professional-grade brands the trade supplies to certified professionals – HeatShield, Gelco, Olympia Chimney, Famco and Copperfield among them – which matters most on the custom caps and masonry crowns these houses need. Our technicians have up to 14 years of experience, and that experience is mostly on older masonry. We serve South Pasadena from nearby Eagle Rock, so the drive is short and the scheduling is straightforward.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in South Pasadena
The chimney top on a South Pasadena house is usually the oldest unmaintained piece of the building. Here’s what we actually do with it.
Cap Installation
A new cap keeps rain, leaves and birds out of the flue and keeps sparks from leaving the stack. On the low-pitched roofs typical of the era here, we set the cap with proper seismic anchoring and a correctly sized spark arrestor screen, because a cap that’s just sitting on the chimney won’t survive the next Santa Ana wind event. We size the cap to the flue, not to whatever is on the shelf.
Cap Replacement
If your cap is rusted through, bent out of shape or has lost its screen, replacement is usually simpler than repair. On these homes the most common failure is a cap that was never anchored to begin with, so we replace it with a properly secured unit that won’t lift off in a wind event. We check the flue opening while the old cap is off.
Crown Repair
The crown is the concrete or mortar cap at the very top of the masonry, and it’s what sheds water off the brick below. Many South Pasadena chimneys built between 1900 and 1930 got a thin mortar wash instead of a true overhanging crown, and after decades of sun and the occasional cold snap that wash spalls and cracks. We rebuild the crown with a proper overhanging pour so water runs off the edge rather than soaking into the brick.
Crown Coating
Where the crown is sound but the surface is starting to break down, a coating can extend its life and seal hairline cracks without a full rebuild. We use crown coating materials from recognized suppliers rather than improvised sealers, and we’ll tell you plainly when coating is enough and when the crown needs rebuilding instead. You see the condition on camera before we do either.
Trusted Brands We Service in South Pasadena
This is a specialist’s page, so the brands matter. We work with professional-grade product lines including HeatShield, Gelco, Olympia Chimney and Famco, and we source caps and crown materials from suppliers who serve the trade. We don’t keep parts stocked on shelves; we order what your chimney actually needs, sized and specified, and we don’t substitute a stock piece for a shaped fit. Turnaround is quick because the specification happens on the inspection and the materials ship against it.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in South Pasadena Homes
- Thin mortar-wash crowns on 1920s chimneys. These crack and spall and let water into the unlined brick below. Once water is in old brick it has nowhere to go, so the crack keeps widening through the seasons.
- Unsecured caps on fragile decorative tops. The era’s chimneys often have elaborate tops that sit on low-pitched roofs, and a cap that was just set in place loses its screen or the whole cap in a wind event.
- Bird and rodent nesting in lightly used flues. Fireplaces here see light, sporadic use, so debris builds up unnoticed between burns and is often only found when the cap comes off for inspection.
- Seismic cracks in original masonry. Old brick chimneys take the movement of the ground differently than the house does, and small cracks near the crown can go years without being seen.
Pricing for Chimney Cap & Crown in South Pasadena, CA
A typical stock cap installation in South Pasadena runs $275-$650, and a custom or multi-flue cap built for an odd-sized original chimney runs $600-$1,400. Crown coating is typically $350-$800, while a full crown rebuild with an overhanging pour runs $700-$1,600. Line-item pricing looks like this:
| Service | Typical estimated range |
|---|---|
| Single-flue cap, stock size | $275-$650 installed |
| Custom cap or multi-flue cap | $600-$1,400 installed |
| Crown coating | $350-$800 |
| Crown rebuild with overhanging pour | $700-$1,600 |
What moves the number is access on the low-pitched roof, the shape of the chimney top, and whether the crown needs a rebuild or a coating. The written estimate sets the final price, and the estimate is free.
We Also Serve Cities Near South Pasadena
We work throughout South Pasadena and the towns around it, including Alhambra, Highland Park, Pasadena and San Marino. The older housing stock in these areas raises the same questions about crowns, caps and flues, so the work carries over cleanly. If you’re in South Pasadena and want a straight answer about your chimney top, call and we’ll get an estimate on the calendar.
Serving South Pasadena, CA – Our Local Coverage Area
We serve South Pasadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in South Pasadena
It depends on how deep the cracking goes, and you can’t tell from the ground. On most original mortar-wash tops we find, the surface has spalled enough that coating alone won’t hold, and a rebuilt overhanging crown is the right call. If the mortar is intact and only hairline surface cracking is present, a crown coating can be enough. We’ll show you the crown on camera and let the condition decide. Call (855) 506-8977 for an exact quote – estimates are free.
Many South Pasadena chimneys from the 1900-1930 era have nonstandard flue openings, so a stock cap often doesn’t seal properly or sits loose. We measure the flue at inspection, and where the shape is irregular we specify a custom cap built to fit and anchored properly. You’ll see the measurement and the fit before we order anything. Call (855) 506-8977 for an exact quote – estimates are free.
Because it was set on the chimney rather than anchored to it. South Pasadena sits in a high fire-severity zone against the Arroyo Seco, and Santa Ana wind events routinely strip unsecured caps off the fragile decorative tops on these older homes. We replace or reinstall caps with proper seismic anchoring and a fitted spark arrestor screen so they stay put. A loose cap or missing screen on a 1920s chimney is also one of the things local inspectors look at closely. Call (855) 506-8977 for an exact quote – estimates are free.
Yes, and the reason isn’t creosote. On lightly used South Pasadena fireplaces the real risk is bird and rodent nesting, leaf debris, and masonry cracks that go unnoticed between rare burns, and you can’t see any of that from outside. A camera inspection before the cap goes on documents what’s in the flue first. If it’s clear, we cap it and move on; if it isn’t, you see what we see. Call (855) 506-8977 for an exact quote – estimates are free.
No. A liner is recommended only when the camera shows something that justifies it, such as a cracked or missing liner, damaged parging, or a gap where the appliance flue doesn’t line up with the stack. Age alone isn’t a reason to sell you one. This is where a lot of upselling happens on South Pasadena’s older homes, and we won’t do it. If the flue is sound, we’ll say so and stop there. Call (855) 506-8977 for an exact quote – estimates are free.
Written by the team at Chimney Sweep Eagle Rock.