Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mount Washington
If you live up one of Mount Washington’s winding hillside streets and your chimney is showing its age, you’re in the right place. We’re Chimney Sweep Eagle Rock, and we send experienced technicians into Mount Washington to diagnose and repair chimneys on the 1920s to 1960s hillside bungalows and Mid-Century Modern homes that make up so much of the neighborhood. We know that access here takes patience (more on the steep driveways and rooftop setbacks below), and we plan for it. Most of what we find in Mount Washington isn’t a worn-out liner at all. It’s water getting into a stack through a failed crown or flashing, and that changes the whole repair. Call (855) 506-8977 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Mount Washington Homeowners Call Chimney Sweep Eagle Rock for Chimney Repair
We’re a dedicated chimney specialist, not a handyman who owns a brush and a ladder. That matters on Mount Washington’s older brick stacks, where a gentle hand and the right mortar are the difference between a repair and a bigger mess. Our technicians have up to 14 years of experience, and they know the housing stock here: original masonry fireplaces, older prefab inserts, and plenty of remodels where a modern gas insert was dropped into a flue that was never sized for it.
We work with professional-grade product lines the industry trusts, including DuraFlex, HeatShield, and Olympia Chimney, so the materials going onto your chimney are engineered products rather than improvised fixes. Because we handle inspection, repair, caps and crowns, and fireplace work under one company, the team that finds the problem is the team that fixes it. No waiting on a second opinion from a different contractor who has to re-scope the whole job.
When you call for chimney repair in Mount Washington, we book a visit and give you a clear read on what’s actually wrong. We’ll tell you exactly what we found and exactly what it means, with no pressure and no guesswork. If it can safely wait, we’ll say so. You’ll see the camera evidence for yourself before anything is recommended.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Mount Washington
Repair needs on a Mount Washington chimney tend to cluster around the parts that take the weather: the crown, the flashing, the mortar, and the brick itself. Here’s how we approach each one.
Mortar Repointing in Mount Washington
Repointing is the work most of Mount Washington’s older chimneys need first. Decades of Santa Ana wind-driven heat and wet winters soften the joints between the brick, and when that mortar starts to recede, water gets behind the brick face. We repoint with a soft, lime-rich mix matched to the original 1920s brick so the repair flexes with the chimney instead of cracking the fragile faces around it. A typical repointing job in Mount Washington runs $600 – $1,800 depending on how much of the stack is affected and how accessible the joints are.
Spalling Brick Repair in Mount Washington
Spalling is what happens when water trapped inside a brick freezes and pushes the face off, or when mortar that’s too hard forces the brick to absorb the stress instead. On Mount Washington’s older stacks, you’ll often see it as flaking or pitted brick near the crown and along the shoulders. We replace the damaged brick with a matched unit and correct the mortar so the new work doesn’t push the same problem onto the next brick over. Spalling brick repair in Mount Washington usually lands between $500 and $1,500.
Chimney Waterproofing in Mount Washington
Waterproofing is the single best thing you can do for an older Mount Washington chimney, and it’s also the most skipped step. A breathable masonry sealer keeps rain out while letting moisture inside the brick escape, which is critical here because a sealer that traps vapor just moves the damage deeper. We apply vapor-permeable waterproofing after the mortar and crown are sound, never before. Chimney waterproofing in Mount Washington typically runs $300 – $700.
Flashing Repair in Mount Washington
The flashing is the metal where your chimney passes through the roof, and on the low-slope and multi-level rooflines common in Mount Washington, it’s a frequent leak point. Failed flashing lets water run straight down the stack and into the attic or ceiling, and it’s often mistaken for a liner problem. We repair or replace the flashing and seal it properly at the roof-to-chimney joint. Flashing repair in Mount Washington generally costs $350 – $900.
Trusted Brands We Service in Mount Washington
We work with a curated roster of professional-grade chimney brands, and it shows in what we can repair rather than replace. When a flue is deteriorating but still structurally sound, HeatShield liner resurfacing lets us restore it from the inside, a method most sweep-only services simply don’t offer. For liners and components, we work with DuraFlex and Olympia Chimney, and our cap and crown work draws on Gelco and Famco products so water-damage prevention is handled with engineered parts. We don’t claim to stock parts locally or promise a turnaround we can’t control, but we do source trade-level materials most residential sweeps don’t carry. For Mount Washington homeowners tired of the “you need a whole new liner” pitch, that means real options.

Common Chimney Repair Problems We See in Mount Washington Homes
The Mount Washington chimney problems we’re called about most often have less to do with fire and more to do with water, old brick, and the way the stack meets the roof.
- Water intrusion misread as a liner failure. A cracked crown or failed flashing lets water into the stack, and that shows up as staining and crumbling masonry that looks like a flue problem. Scoping the flue with a camera before recommending anything is how we tell the difference instead of guessing.
- Soft 1920s brick damaged by aggressive cleaning. High-pressure washing or a hard mortar mix on original brick accelerates spalling and erodes the joints. We clean and repoint gently so the fragile brick faces survive the repair.
- Remodeled gas inserts vented into the wrong flue. A gas insert added to a 1950s Mount Washington bungalow often shares an unlined or clay-tile flue that was never sized for it, which causes condensation damage and draft problems that go unnoticed until the smoke chamber is scoped. This is exactly where an unnecessary relining upsell tends to start.
- Original crowns and caps that stopped shedding water. Rain on an old crown cracks it further each wet winter, and here the wet winters come with mild temperatures but plenty of moisture. A rebuilt crown and a properly fitted cap keep the stack dry between storms.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Mount Washington, CA
Chimney repair pricing in Mount Washington tracks the work, not a sales script. Here’s what the common jobs typically run in this market: mortar repointing $600 – $1,800, spalling brick repair $500 – $1,500, chimney waterproofing $300 – $700, and flashing repair $350 – $900. Larger structural work like a partial rebuild runs higher and gets its own line-item estimate. What moves the number is how much of the stack is affected, whether access requires hauling equipment up a steep driveway or staging around adjacent trees, and whether the crown needs rebuilding at the same time. Those are estimates, and the written estimate sets the final price. Nothing gets added without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait. Call (855) 506-8977 for an exact quote. Estimates are free.
We Also Serve Cities Near Mount Washington
Mount Washington sits close to several neighborhoods we cover, and we’re glad to look after chimneys across the area. We work in Mount Washington and the surrounding communities of Glassell Park, Atwater Village, Highland Park, and Eagle Rock. If you’re just over the hill, the same team and the same approach applies. Reach out and we’ll talk through your chimney wherever you are nearby.
Serving Mount Washington, CA – Our Local Coverage Area
We serve Mount Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Mount Washington
Most crumbling mortar on a 1920s Mount Washington chimney can be fixed with repointing, not a full rebuild. Repointing replaces the eroded mortar joints with a soft, lime-rich mix matched to the original brick, which restores the stack without tearing it down. A rebuild is only warranted when the brick itself is structurally failing, and we won’t recommend one without showing you the camera evidence first. Call (855) 506-8977 for a free estimate and an honest read on which you actually need.
You can tell an upsell by one thing: whether the technician shows you camera footage and photos of the actual problem. If someone says you need a new liner or thousands of dollars of masonry without scoping the flue and letting you see what they see, that’s a red flag. In Mount Washington’s older homes, “cracked flue” calls are frequently failed crowns and flashing letting water in, not a liner failure at all. We scope first, show you the evidence, and tell you when work can safely wait. Call (855) 506-8977 for a free estimate you can verify.
Yes, a gas insert added to a 1950s bungalow still needs the flue inspected annually, even though gas burns cleaner than wood. The problem is that many inserts were vented into an unlined or clay-tile flue never sized for them, which causes condensation damage and draft problems that go unnoticed until the smoke chamber is scoped. We inspect the flue with a camera and tell you what condition it’s really in. Call (855) 506-8977 for a free estimate.
Spalling looks like flaking, pitted, or peeling brick faces, most often near the crown and along the shoulders of the stack, and yes, it’s worth taking seriously. Once a brick face is gone, water gets deeper into the masonry and the damage spreads to the joints and the next brick over. On Mount Washington’s older brick, aggressive cleaning or hard mortar makes spalling worse, so the repair has to be done gently. Call (855) 506-8977 for a free estimate and we’ll match replacement brick to your original.
It matters a great deal, and in Mount Washington it’s a year-round concern rather than a winter one. Mount Washington is a Very High Fire Hazard Severity Zone, and Santa Ana winds bring very dry air and high fire danger, especially in late summer and fall, so a damaged spark arrestor or missing cap is a real risk. Creosote buildup and a faulty arrestor can let embers escape, and keeping both in good repair is part of wildfire prevention. Call (855) 506-8977 for a free estimate on cap and spark arrestor repair.
Book Chimney Repair in Mount Washington
Old chimneys deserve a straight answer and a careful hand, and that’s what we bring to Mount Washington. Whether it’s a crumbling crown, spalling brick, or a quote you want a second look at, we’ll scope it, show you the evidence, and repair what actually needs repairing with materials from brands the trade trusts. Call (855) 506-8977 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Eagle Rock.