Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Highland Park
If your cap is rattling in the wind or the crown on top of your chimney has gone chalky and cracked, you’re in the right place. We handle chimney cap and crown work across Highland Park, and we know how the older bungalows here are built, from their unlined brick stacks to the rubble-stone chimneys that predate modern flue tile. We work the 90042 corridor and the surrounding streets routinely, so getting a specialist out to you doesn’t mean waiting on a generalist who mostly does gutters. Call (855) 506-8977. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate.

Why Highland Park Homeowners Call Chimney Sweep Eagle Rock for Chimney Cap & Crown
We’re a dedicated chimney specialist, not a handyman adding a brush to the truck. That focus matters here because the cap and crown work in Highland Park isn’t a one-size job. It’s cutting and recasting a mortar crown on a stack that was never built to a modern spec, or fitting a custom cap to a flue opening that no off-the-shelf size matches. We carry the trade-level sourcing to do that properly, working with professional-grade lines including Gelco, Olympia Chimney, and Famco rather than improvised fixes.
Highland Park homeowners call us because the same team that inspects is the team that repairs, and that team shows its work. You get a camera inspection and a photo report, so you can see the flue interior and the crown on screen before anything is recommended. No pressure, no guesswork. Our technicians have up to 14 years of experience, and we’ve built a strong local reputation on the simple idea that a diagnosis should come before a price.
Getting to Highland Park is straightforward for us, since it sits right next to our Eagle Rock service area. When you call, we book the sweep and tell you what the visit covers. Call (855) 506-8977 to set it up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Highland Park
A chimney cap and its crown are two different parts doing two different jobs, and Highland Park’s housing stock stresses both. The crown is the sloped concrete or mortar bed at the top of the stack that sheds water away from the brick. The cap sits above the flue opening to keep out rain, animals, and sparks. Here’s how we handle each on the older chimneys you find around here.
Cap Installation in Highland Park
We fit a new cap sized to your actual flue opening, not a universal model forced onto it. On the pre-1930 bungalows along the 90042 corridor, that often means a custom or multi-flue cap because the original openings don’t match standard dimensions. A properly seated cap protects an unlined brick or rubble-stone flue from the rain that would otherwise track straight down into the masonry.
Cap Replacement in Highland Park
When a loosely seated cap gets pried loose by Santa Ana winds, it stops doing its job and starts admitting water and wildlife. We pull the old cap, check the flue top for damage, and seat a replacement that’s anchored for the wind load this area sees. If the original cap was never sized for your flue, we correct that in the swap rather than repeating the mistake.
Crown Repair in Highland Park
Original pre-1930 crowns were built from brittle mortar that cracks and spalls under summer heat and seasonal wind, letting water work down into unlined brick. We grind out the failed material and recast the crown so it slopes and sheds properly. On a historic home, we check with you on the review question before we change exterior masonry, so a repair doesn’t create a compliance headache.
Crown Coating in Highland Park
Where a crown is still structurally sound but showing surface wear, a proper coating seals the mortar against the moisture that drives spalling. We use it on crowns that don’t yet need a full recast, which keeps a sound crown in service longer. If the crown is too far gone for a coating to hold, we’ll tell you why and show you on camera.
Trusted Brands We Service in Highland Park
Cap and crown work is only as good as the materials going on the roof, so we source from the professional-grade brands the trade relies on. For caps and crown components that means Gelco, Olympia Chimney, and Famco, and for liner-related work that comes up during the same visit we use HeatShield and DuraFlex. We don’t stock parts in a warehouse and we don’t claim to; we specify the right product for your flue and get it in. If your old cap or crown calls for a piece that a local hardware store doesn’t carry, that’s exactly the gap trade-level sourcing closes. The result is a cap and crown built to last rather than a stopgap that fails by the next wind season.
Common Chimney Cap & Crown Problems We See in Highland Park Homes
- Cracked and spalling mortar crowns. The original crowns on Highland Park’s pre-1930 bungalows were cast from brittle mortar, and Santa Ana wind events plus summer heat open cracks that let water track down unlined brick. Once water is in the masonry, the crown and the flue both suffer.
- Caps never sized for the flue. On unlined clay-tile or rubble-stone flues, an old cap that was never properly sized or seated gets pried loose by wind. That opens the flue to rain, animals, and downdrafts, and it’s a common find on the older homes here.
- Gas-insert retrofits with a stale venting setup. When a fireplace on an older Highland Park bungalow was converted to a gas insert, the flue and its cap and crown were often never revisited for the new setup. A routine inspection turns up disconnected or unlined flues on homes where a tightly sealed room sits above.
- White flaking on the crown surface. Efflorescence and surface spalling signal moisture moving through the mortar, and on Highland Park’s older stacks it usually points back to a crown that’s stopped shedding water. Catching it early is cheaper than a rebuild.
What causes all of these is the same: an old chimney that was never built with a modern liner, put to work venting a fireplace that burns more than it was designed for. That’s the whole story on a lot of Highland Park stacks. It’s also why we never recommend liner or masonry work without camera evidence you can see.

Pricing for Chimney Cap & Crown in Highland Park, CA
Our cap and crown pricing is set per job, but you deserve real numbers to plan around, not a shrug. In Highland Park’s market, a typical single-flue cap replacement runs about $250 to $550, sized and anchored. A custom or multi-flue cap for a non-standard opening usually runs $450 to $900. A crown recast runs roughly $400 to $850 depending on the size and condition of the stack, and a crown coating on a sound crown is a lighter job in the low to mid hundreds.
| Service | Typical Highland Park range |
|---|---|
| Cap replacement (single flue) | $250 – $550 |
| Custom or multi-flue cap | $450 – $900 |
| Crown recast | $400 – $850 |
| Crown coating | Low to mid hundreds |
What moves the number is the condition of the stack, whether the crown needs a full recast versus a coating, and whether the flue opening requires a custom cap. On Highland Park’s older homes there’s often a surprise underneath, and we show it on camera rather than just quoting for it. The written estimate is what sets your final price, and the estimate itself is free. Call (855) 506-8977 for yours.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Highland Park
Highland Park sits in good company, and we cover the neighboring areas too. Homeowners in Highland Park are minutes from our Eagle Rock service area, and we also work in Glassell Park, Mount Washington, and South Pasadena. If you’re just across a boundary line and searching for chimney cap and crown work, you’re within reach. Explore our chimney cap & crown services and call to book. We’ll tell you exactly what the visit covers before we come out.
Serving Highland Park, CA – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Highland Park
Often yes. An unlined brick or rubble-stone flue needs a cap sized and seated for that specific opening so rain and animals stay out, and a generic model usually isn’t the right fit. Because these original openings don’t match standard dimensions, a custom or multi-flue cap is common on Highland Park’s older bungalows. We measure the actual flue before recommending anything. Call (855) 506-8977 for a free estimate.
It can, which is why we flag it before we touch exterior masonry. Many of Highland Park’s 1900s – 1930s bungalows sit inside a historic-preservation review area where neighbors may flag exterior alterations, and that includes changes to a visible chimney crown. We’ll walk you through whether the work is likely to need a compliance check and plan the job around it. Call (855) 506-8977 and we’ll talk through your address.
You see the evidence yourself. We run a camera inspection and show you the flue interior and crown on screen, and nothing gets recommended that isn’t visible there. This is the area where the chimney trade does its worst upselling, and we do it differently: photo report included, and a plain statement of when work can safely wait. Call (855) 506-8977 if you want a second look at a recommendation.
Yes, and it’s one of the more common finds on older Highland Park homes. A gas-insert retrofit often leaves a disconnected or unlined flue, and the cap and crown were frequently never revisited for the new venting setup. That matters for a tightly sealed room above, because it’s a carbon monoxide concern, not just a draft one. A camera inspection documents what’s actually happening. Call (855) 506-8977 to book one.
White flaking usually means moisture is moving through the mortar and leaving mineral deposits behind, which points to a crown that’s stopped shedding water. On Highland Park’s older stacks, that’s typically brittle original mortar cracked by summer heat and wind. A crown coating can seal a sound crown, but a badly spalled one needs a recast. Call (855) 506-8977 and we’ll tell you which you’re looking at, with the camera evidence to back it up.
What Actually Happens on a Highland Park Cap and Crown Job
On an unlined brick or rubble-stone chimney typical of Highland Park’s pre-1930 bungalows, a winter of wood burning lays down creosote while Santa Ana winds and summer heat crack the mortar crown and pop a loosely seated cap. Here’s how a qualified local pro handles it. A Level 2 inspection with a camera comes first. You see the flue interior and the crown on screen. Then the crown gets ground out and recast, the cap gets seated or replaced, and any historic-review question is flagged before exterior masonry changes. Where a gas insert was retrofitted into an old fireplace, the same visit often reveals a disconnected or unlined flue that needs documenting for the room sealed above it. One team covers it, start to finish, with the same materials the top manufacturers supply to certified professionals.
Book Your Chimney Cap & Crown in Highland Park
When a cap is loose or a crown is failing, the water damage waiting underneath is the real cost of putting it off. We’ll tell you exactly what we found and exactly what it means, show you the camera evidence, and say plainly when work can safely wait. Call (855) 506-8977 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers inspection, cleaning, and repair across Highland Park and the surrounding neighborhoods.
Written by the team at Chimney Sweep Eagle Rock.