Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Eagle Rock Homeowners
If your fireplace smokes into the room, your damper won’t close, or your gas logs light and then die, the fix isn’t guesswork. It’s a diagnosis. Our technicians have up to 14 years of experience working on both wood-burning and gas fireplaces, and we carry the trade-level materials to do the repair right the first time. A fireplace that’s been sitting unused in an older Eagle Rock home often has more than one problem hiding behind the same symptom. We inspect, we show you what we found with photos, and we repair it with a written estimate agreed before any work starts. Call (855) 506-8977 to book a visit.

What Our Fireplace Repair Service Includes
One company handling every part of the fireplace system means you don’t get handed off between a sweep, a mason and a gas technician. We inspect and repair from the same visit. Here’s what we fix.
Gas Fireplace Repair
Gas fireplaces fail in specific ways: a burner that won’t stay lit, uneven flames, soot build-up on the logs, or a smell of gas when the unit kicks on. These symptoms usually point to a blocked burner orifice, a failing thermocouple, or a control valve that’s reached the end of its life. We diagnose the actual cause and repair the specific component, then test the unit through a full light-and-run cycle before we leave.
Wood Burning Fireplace Repair
Wood-burning fireplaces develop problems from years of heat cycling: cracked brick, crumbling mortar joints, a warped damper, or a firebox that’s lost its seal. Smoke rolling into the room instead of up the flue is the most common complaint. We look at the firebox, damper, smoke shelf and flue together, because one problem often masks another.
Fireplace Insert Service
An insert that’s poorly fitted or has a failing blower won’t heat the way it should, and an improperly sealed connection at the flue collar can let exhaust into the room. We inspect the insert’s connection to the liner, check the blower and controls, and service the unit so it recovers its efficiency. If the insert was installed without a proper liner connection, we can correct that.
Damper Repair
A damper that won’t open fully, won’t close tight, or is stuck in position is more than a nuisance. A damper stuck open in summer lets conditioned air escape up the flue, while one stuck closed after a fire traps smoke and heat in the box. We repair the hinge, track, or pivot assembly, and replace the damper when repair won’t hold. The damper is part of a system, so we check it alongside the firebox and flue during the same visit.
Firebox Repair
The firebox takes the direct heat and needs its refractory material intact. Cracked firebrick, crumbling mortar joints, or a firebox liner that’s spalled can let heat reach the surrounding structure. We repair the firebox with materials rated for the temperature, then check the smoke shelf and damper while we’ve got it open.
Pilot Light Repair
A pilot that won’t stay lit is one of the most common gas fireplace problems. The thermocouple or thermopile is usually the culprit, though a dirty pilot orifice or a low gas supply can cause the same symptom. We replace the failed component and test the pilot through a full cycle so you know it’s holding before we pack up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade brands because they hold up to the heat cycling a fireplace goes through. HeatShield is a liner resurfacing system, and the reason we carry it is that a lot of fireplace problems start in the flue; when the flue needs restoring rather than just cleaning, that capability is what separates a repair visit from a cleaning visit. Gelco and Famco are the brands we use for cap and crown work, because the water entry that damages a firebox usually comes in from the top.
Olympia Chimney supplies liner and venting components, so when a repair involves the flue connection we’re working with materials the trade trusts rather than improvised parts. Whether you have equipment from one of those makers or any other make, we can help; the diagnosis comes first and the repair follows from it.
Signs You Need Fireplace Repair Right Now
- Smoke entering the room. This usually means the damper isn’t opening fully or the flue is obstructed. Smoke in the room is carbon monoxide risk and a sign the system needs a look before the next fire.
- A damper that won’t move. A stuck damper is a safety issue, not a convenience one. If it’s stuck closed, smoke has nowhere to go; if it’s stuck open, you’re losing heat year-round.
- Visible cracks in the firebox. Cracked firebrick or crumbling mortar lets heat reach the structure behind it. Stop using the fireplace until a technician confirms the firebox is sound.
- A pilot that won’t stay lit. For gas units, this is a failing thermocouple more often than not. It’s a small part with a big effect on whether the fireplace works.
- A gas smell near the fireplace. Any gas odor is a stop-and-call situation. Turn the unit off, leave the gas valve off, and have it checked before you use it again.
Across Eagle Rock, older homes tend to have fireplaces that were built decades ago and repaired piecemeal. A single crack gets patched, the damper gets freed up, and the underlying cause goes untouched. That pattern is why we inspect the whole system before we touch a single component. It’s also why we do a chimney sweep in Eagle Rock and an inspection on the same visit when the fireplace is showing symptoms, so the diagnosis and the repair come from the same technician.
Our Fireplace Repair Process – Step by Step
- 1
Book the visit. You call, we get the details of what the fireplace is doing, and we schedule a visit. The estimate is free, and the price is set per job by the written estimate.
- 2
Inspect before we touch anything. We run a camera through the flue and check the firebox, damper, smoke shelf and, for gas units, the burner and controls. We photograph what we find. Nothing gets recommended without evidence you can see yourself.
- 3
Show you the findings. We walk you through the photos and explain what each finding means, in plain language. If the repair can safely wait, we say so. If it can’t, we explain the specific risk.
- 4
Agree the written estimate. You get a clear price for the specific repair, agreed before any work begins. No surprise charges after the fact.
- 5
Repair and test. We complete the repair with the materials the job calls for, then test the fireplace through a full burn or light cycle and confirm the fix before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Eagle Rock?
Fireplace repair in Eagle Rock typically ranges from around $150 to $250 for a pilot light or thermocouple replacement, $200 to $400 for damper repair, and $300 to $600 for firebox repair depending on how much refractory material needs replacing. Gas fireplace repair often lands in the $200 to $450 range, while insert service runs $250 to $500. These are estimates, and the written estimate sets the final price.

What moves the price: the number of components that need repair, whether the firebox has to be rebuilt or just patched, and whether the flue needs attention at the same time. Fireplace repair often pairs with a chimney sweep in Eagle Rock because a blocked or sooted flue is behind a lot of fireplace symptoms, and cleaning it first saves you paying twice for the same visit.
You avoid overpaying by getting the diagnosis documented first and by asking whether the repair can wait. Nothing gets recommended without camera evidence, and we tell you plainly when a fireplace can safely sit until next season. A free estimate includes the inspection findings, the photos, and the itemized price for the repair.
Fireplace Repair Near Eagle Rock – Our Service Area
We work across Eagle Rock and the surrounding neighborhoods, including Highland Park, Mount Washington, Glassell Park, El Sereno, Atwater Village and South Pasadena, plus La Cañada Flintridge, La Crescenta-Montrose, Glendale and Pasadena to the north. For a fireplace that smokes or won’t light, we can often get a technician out the same day. You can also read more about fireplace repair in Glassell Park and nearby cities on the site.
Serving Eagle Rock, CA – Our Local Coverage Area
We serve Eagle Rock and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Eagle Rock
Fireplace repair is fixing the specific components of a fireplace system that have failed: the damper, firebox, pilot light, burner, insert connection or gas controls. It’s distinct from a cleaning, which removes creosote and soot, and from a chimney repair, which addresses the structure above the firebox. We diagnose the component, repair or replace it, and test the fireplace before we leave.
Most fireplace repairs take one to three hours on site. Pilot light and thermocouple replacements are usually under an hour; firebox repairs take longer because the refractory material has to be applied and cured properly. We give you a time estimate with the written quote so you know what to expect.
Typical fireplace repair in Eagle Rock runs $150 – $250 for a pilot or thermocouple replacement, $200 – $400 for damper repair, and $300 – $600 for firebox repair, depending on scope. Gas fireplace repairs often fall in the $200 – $450 range, and insert service runs $250 – $500. The written estimate sets the final price. Call (855) 506-8977 for an exact quote. Estimates are free.
Yes, we repair gas fireplaces, including burner, pilot light, thermocouple, thermopile and control valve issues. For gas work, we check the burner and controls as part of the same visit and test the unit through a full cycle before we leave. If the problem involves gas line components, that’s a job for a licensed professional, and we’ll tell you when that’s the case.
Same-day repair is often possible when you call during dispatch hours. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside those hours gets booked into the next opening. We don’t promise a specific arrival time; we do give you the earliest available window when you call.
We stand behind our repairs with a satisfaction guarantee. If something we fixed isn’t working the way it should, call us and we’ll make it right. The details of what’s covered are included with your written estimate before you commit to the job.
Clear the area around the fireplace, move anything breakable away from the hearth, and note what the fireplace actually does when you light it: does it smoke, does the pilot die, does it make a noise? That description helps us diagnose faster. For a gas unit, don’t attempt any work on the gas side yourself. High-voltage and gas components are dangerous and need a trained professional.
Schedule Your Fireplace Repair Service in Eagle Rock Today
If your fireplace smokes, won’t light, or you’re not sure it’s safe to use, call us. We’ll inspect the system, show you what we found with camera evidence, and give you a written estimate for the repair before any work begins. Call (855) 506-8977. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Chimney Sweep Eagle Rock.