Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Mount Washington?
Chimney cleaning in Mount Washington typically costs $175 to $450 for a standard sweep of a wood-burning fireplace, and most homes here land around $250 once we account for the steep rooflines and hillside access common in this neighborhood. If the flue needs a camera inspection or the firebox has heavy creosote, expect $300 to $600. The written estimate you get before any work begins is what sets your final price.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 506-8977 for a free estimate.
Key Takeaways
- Standard chimney sweep in Mount Washington: $175 to $450, with most jobs near $250.
- Sweep plus a Level 2 camera inspection: $350 to $650.
- Heavy creosote removal (Stage 3): $400 to $800.
- Animals, nests, or blockages: $250 to $550 including removal.
- Estimates are free. The written estimate sets the final price, per job.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items tend to price out in the Mount Washington market. These are typical estimates, not quotes. Your written estimate is the number that matters.
| Service | Typical Price Range | Notes |
|---|---|---|
| Standard chimney sweep (wood-burning fireplace) | $175 – $450 | Most jobs near $250 |
| Sweep with Level 1 inspection | $225 – $500 | Standard for annual maintenance |
| Level 2 inspection (camera, video) | $200 – $450 | Recommended after purchase or a chimney fire |
| Heavy creosote removal (Stage 3, glazed) | $400 – $800 | Requires specialized tools and time |
| Blockage or animal nest removal | $250 – $550 | Includes sweep and inspection |
| Chimney cap installation | $225 – $550 | Gelco, Famco, Olympia Chimney caps |
| Crown repair or rebuild | $450 – $1,400 | Depends on crack extent and access |
| HeatShield liner resurfacing | $1,800 – $4,500 | Restores a deteriorating flue without full relining |
| Full stainless liner replacement (DuraFlex) | $2,800 – $6,500 | Depends on height and flue configuration |
What pushes a Mount Washington sweep toward the top of the range: the chimney is on a steep-slope lot, the flue is offset or unusually tall, or buildup sits at Stage 3. What keeps it near the bottom: a straight, accessible flue swept on a regular schedule, no animals, and a cap already in place protecting the opening. If your chimney has never been inspected since you moved in, we recommend bundling a sweep with a Level 2 inspection so you know what you’re working with in one visit. The chimney sweep Eagle Rock page covers the full lifecycle of what we do; the pricing page you’re reading is about getting you a real number first.
What Affects Chimney Cleaning Pricing in Mount Washington
Several factors move the price more than others. Here’s what actually changes the estimate in this neighborhood:
- Roofline and hillside access. Mount Washington homes often sit on graded lots where the chimney is set back from the ridge. Getting brushes and a camera to a chimney in that position takes longer and requires more careful setup than a flat-lot job.
- Flue height and configuration. A single-story flue sweeps faster than a two-story offset flue. Tall or offset flues take extra time and may need to be swept in sections.
- Creosote stage. Stage 1 (sooty) sweeps in the standard window. Stage 2 (brittle and flaky) adds time. Stage 3 (glazed, hardened) needs specialized removal tools and lands at the upper end of the range.
- Wood-burning habits. Homes burning unseasoned wood or overheating the firebox build creosote faster, which means more frequent sweeps and sometimes heavier buildup at the time of the sweep.
- Blockages and animals. Birds, squirrels, and raccoons nesting in an uncapped flue are common in the hillside neighborhoods. Removing a nest and disinfecting the flue adds to the base sweep.
- Inspection level. A Level 1 visual inspection is often bundled into a routine sweep. A Level 2 camera inspection costs extra and is worth doing when you’ve just bought an older home or suspect a problem.
We’ll tell you exactly what we found and exactly what it means before any work starts. No pressure, no guesswork, no upsell for its own sake.
How Much Does a Chimney Inspection Cost in Mount Washington?
Chimney inspections in Mount Washington typically cost $200 to $450 for a Level 2 camera inspection, and a Level 1 visual inspection is often bundled into a standard sweep at no separate charge. If you’ve just bought an older Mount Washington home and don’t know the chimney’s history, the Level 2 is what we recommend. It runs a video camera down the flue so we can see cracks, gaps in the liner, or offset areas that a visual inspection can’t reach.
The value of an inspection sits in what happens next. Our inspections are paired with repair capability, so you get a diagnosis and a remedy from the same team. If the flue needs HeatShield resurfacing, a DuraFlex liner, or a crack in the crown sealed, we quote it on the spot. No bouncing between a sweep who says “something’s wrong” and a mason who says “bring me the report.”
Call (855) 506-8977 for a free estimate on an inspection. Estimates are free, and the price is set per job by the written estimate.
How Much Does Creosote Removal Cost in Mount Washington?
Heavy creosote removal (Stage 3, glazed creosote) in Mount Washington typically runs $400 to $800, compared to a standard sweep in the $175 to $450 range. Stage 3 creosote is hardened, shiny, and bonded to the flue wall. A regular brush won’t cut it. It needs chemical treatment or rotary removal tools, sometimes across more than one visit, which is why the price climbs.
If your chimney smells strongly of smoke between fires, or you’ve had a chimney fire you didn’t fully extinguish, Stage 3 buildup is likely. So is a flue that’s never been swept since before you bought the house. This is a case where the sweep is genuinely more work, not a padded bill.
Call (855) 506-8977 for a free estimate on creosote removal. Fast dispatch from 7am to 7pm, Sunday through Friday.
How Much Does a Chimney Cap or Crown Cost in Mount Washington?
Chimney cap installation in Mount Washington typically costs $225 to $550, and crown repair or rebuild typically runs $450 to $1,400 depending on the extent of the cracking and how accessible the crown is. A cap is the cheapest water-damage prevention you can buy for a chimney, and in a hillside neighborhood with trees overhead and occasional wind-driven rain, it’s money well spent.
We install caps from Gelco, Famco, and Olympia Chimney, which are engineered products designed to vent properly, not improvised screens from a hardware store. Crown work uses materials matched to the chimney’s masonry. The goal is simple: keep water out of the flue so you’re not paying to repair damaged masonry in a year.
How Much Does Liner Resurfacing Cost in Mount Washington?
HeatShield liner resurfacing in Mount Washington typically costs $1,800 to $4,500, compared to $2,800 to $6,500 for a full stainless liner replacement using DuraFlex. That gap is why HeatShield matters: it restores a deteriorating clay flue from the inside without taking the chimney apart, and it’s a specialized method that basic sweep-only services can’t offer.
Not every flue qualifies for resurfacing. If the clay tile is cracked through or the flue has lost structural integrity, a DuraFlex stainless liner is the proper fix. We carry both capabilities, so the recommendation follows the inspection, not the other way around.
Call (855) 506-8977 for a free estimate on liner work.
How Much Does an Emergency Chimney Call Cost?
Emergency chimney calls are priced per job from the same written estimate as a routine visit. There is no separate emergency surcharge in our pricing. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. If your chimney is smoking into the house, a bird is trapped, or you smell smoke strongly between fires, call and we’ll get you on the schedule.
How to Save on Chimney Cleaning
There’s no coupon needed to keep a chimney sweep cost reasonable. The savings come from how you use the chimney and when you book the work:
- Sweep on a schedule. An annual sweep for a regularly used fireplace keeps creosote at Stage 1 or 2 and keeps the job in the lower half of the price range.
- Burn seasoned wood. Dry, well-seasoned firewood creates less creosote than green or unseasoned wood. Less buildup, faster sweeps, fewer repeat visits.
- Install a cap. A cap keeps birds, squirrels, and rain out of the flue. That alone removes one of the most common line items from a Mount Washington sweep estimate.
- Bundle inspection with the sweep. A Level 2 camera inspection is cheaper when done on the same visit as the sweep than as a stand-alone appointment.
- Catch cracks early. A small crown crack sealed now costs less than a rebuilt crown later. Same for a HeatShield resurfacing versus a full liner replacement.
- Get a free estimate. Every estimate is free. Call (855) 506-8977 and we’ll give you a written price before any work begins.
What to Expect on a Mount Washington Chimney Sweep
A standard sweep takes about an hour to ninety minutes for a single flue. We set up drop cloths, run a brush matched to your flue type, and vacuum as we go so no soot ends up on your floor. If you’re home, we’ll walk you through what we found. If you aren’t, we photograph the flue interior and share the findings with the estimate for any recommended repairs.
If the sweep uncovers a problem, whether a cracked crown, a deteriorated liner, or a loose damper, we have the capability to fix it. Chimney repair is one call away, handled by the same team that just swept the flue. That’s the difference between a sweep-only service and a dedicated chimney specialist. Our technicians have up to 14 years of experience, and we use the same professional-grade materials the industry’s top manufacturers supply to trade professionals. DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield are the brands we work with, and that list is not accidental: it’s a signal that the materials in your chimney are sourced at the trade level, not the hardware-store level.
Homes in the hillside neighborhoods near Glassell Park and Eagle Rock face similar access challenges, and we cover both. If you’re in Highland Park or Cypress Park, the same team handles your sweep. For homes further west, Silver Lake and Los Feliz are part of the same service area. Across the hills, Pasadena and South Pasadena round out the map. Wherever you are in the area, the estimate is free and the price is set per job.
Is It Cheaper to Repair or Replace a Chimney?
Repair is almost always cheaper than replacement. HeatShield resurfacing at $1,800 to $4,500 restores a deteriorated flue that would otherwise need a full liner replacement at $2,800 to $6,500, and a crown repair at $450 to $1,400 prevents water damage that could cost far more if left alone. Replacement is the right call only when the structure itself has failed. An inspection tells you which. Call (855) 506-8977 for a free estimate.
Can You Come Today?
Same-day service is often available. Sweeps booked before the dispatch window closes can frequently be scheduled the same day depending on route. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 506-8977 for the soonest available appointment.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Mount Washington in 2026?
Chimney cleaning in Mount Washington typically costs $175 to $450 for a standard sweep, with most homes landing around $250. Heavy creosote, animal blockages, or a Level 2 inspection add to that. Call (855) 506-8977 for an exact quote. Estimates are free.
Is chimney cleaning really necessary every year?
Yes, for a fireplace you use regularly. Annual sweeps keep creosote at Stage 1 or 2 and keep the job in the lower price range. Skipping years builds creosote toward Stage 3, which costs $400 to $800 to remove. A yearly sweep at $175 to $450 is cheaper than waiting. Call (855) 506-8977 to schedule.
Why is my chimney sweep quote higher than the $175 starting price?
The base price of $175 to $250 assumes a clean, accessible, single-flue chimney with Stage 1 buildup. Steep-slope roof access, tall or offset flues, Stage 3 creosote, animal nests, or bundled inspection work push the price up. The written estimate you get before any work begins is the final price. Call (855) 506-8977 for a free estimate.
What’s included in a chimney sweep?
A standard sweep at $175 to $450 includes brushing the flue, removing soot and creosote, vacuuming the firebox and smoke chamber, and a visual check of the accessible components. A Level 2 camera inspection is quoted separately at $200 to $450. Call (855) 506-8977 for the full scope on your chimney.
Do I need a chimney cap if my chimney didn’t have one?
Yes. A cap at $225 to $550 keeps rain, birds, squirrels, and debris out of the flue and is the cheapest water-damage prevention for a chimney. We install caps from Gelco, Famco, and Olympia Chimney, which are engineered products that vent properly. Call (855) 506-8977 for a cap estimate.
Get a Free Chimney Cleaning Estimate in Mount Washington
No two chimneys in Mount Washington price the same, and the only number that counts is the one on your written estimate. We answer 24/7, fast dispatch runs from 7am to 7pm Sunday through Friday, and every estimate is free. Whether you need a routine sweep, a camera inspection, a cap, or a full liner restoration, one call covers it. Our technicians have up to 14 years of experience, and the same team that inspects is the team that repairs, using quality-sourced materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. There’s no juggling multiple contractors and no waiting on a second opinion. Call (855) 506-8977 for a free estimate, and we’ll tell you exactly what we found and exactly what it means.
Pricing reflects the Mount Washington market as of 2026. Chimney Sweep Eagle Rock offers free estimates – call (855) 506-8977.
Written by the team at Chimney Sweep Eagle Rock.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Steve Meyer"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Carmen Hernandez"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Chris Brooks