Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Alhambra
If your chimney is on a 1920s or 1930s stucco-clad house in Alhambra, the repair rarely starts at the roof. It starts with what’s hidden behind the stucco, in the flue, and at the tie-in to the roof. We’re chimney specialists, not a handyman crew, and we work all over Alhambra – from the bungalow blocks south of Main Street to the homes along Garfield and Valley. One call covers the diagnosis and the fix: chimney repair handled by the same technicians who inspect. Call (855) 506-8977 for a free estimate.

Why Alhambra Homeowners Call Chimney Sweep Eagle Rock for Chimney Repair
Alhambra has a lot of older masonry, and that’s exactly where the trade’s worst upselling happens. A brush gets sent up a stack, someone comes down with a story about a flue that “has to be lined,” and the homeowner has no way to check it. We do it the other way: the camera runs first, and you see the footage before anyone recommends a liner, a new crown, or a repointing job.
The technicians we work with have up to 14 years of experience, and they’re chimney specialists – not multi-trade contractors splitting their attention across gutters and drywall. We use materials from professional-grade manufacturers: HeatShield for liner resurfacing, Gelco and Olympia Chimney for caps and crowns, Famco for flashing and accessories. That matters on a stucco-clad Alhambra stack, because the fix has to work with the finish on the house, not against it.
We also know our neighbors here. Homeowners in Alhambra, South Pasadena, and San Marino call us because the inspection and the repair come from the same company – no second-opinion waiting game, no referral out when the job gets hard. We’re a dedicated chimney company for Alhambra, and we take that focus seriously.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Alhambra
The repair scope on an Alhambra chimney usually mixes structural, water, and thermal problems. Here’s what we actually do about each.
Mortar Repointing in Alhambra
On Alhambra’s older bungalow and Spanish Colonial blocks, the exterior chimney breast is usually stucco over brick. When the mortar joints behind that stucco start to crumble, you often see it as hairline cracks in the stucco or white staining on the brick. Repointing means grinding out the failed mortar and packing in new material matched to the existing joint profile. On a stucco-clad stack, we also feather the repair into the surrounding stucco so the chimney doesn’t end up with a patch you can spot from the street.
Spalling Brick Repair in Alhambra
Spalling is brick face flaking off – usually after moisture gets into the masonry and works its way out. In Alhambra, a lot of this shows up on the north and east faces of chimneys, where the winter rain hits hardest. We replace spalled units with brick matched as closely as possible, then address the moisture source that caused the spalling in the first place. Spalling is a symptom, not a standalone problem.
Chimney Waterproofing in Alhambra
Waterproofing is one of the highest-value repairs on an Alhambra chimney. Alhambra sits in the San Gabriel Valley with mild, damp winters and dry summers, and that rhythm is hard on mortar and stucco. We apply a breathable vapor-permeable sealant that sheds rain without trapping moisture inside the masonry – the wrong sealant on a chimney just moves the water problem around. Most Alhambra waterproofing jobs include the crown inspection, because a bad crown sends water straight down the stack.
Flashing Repair in Alhambra
Flashing is where the chimney meets the roof, and it’s the most common source of “the chimney is leaking” calls in Alhambra. Old flashing lifts, pulls out of the mortar bed, or corrodes at the corners. We re-set or replace the flashing with proper counter-flashing and a new mortar bed at the tie-in, using Famco materials where they fit the job. What looks like a masonry leak from inside the attic is very often flashing at the roof line.
Trusted Brands We Service in Alhambra
We work with the manufacturers the chimney trade actually trusts – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. HeatShield is the brand we rely on for liner resurfacing, which restores a deteriorating clay flue without a full liner install when the tiles are still in reasonable shape. Gelco, Olympia Chimney, and Famco supply the caps, crowns, and flashing components we use to close the chimney off from water and wildlife. We don’t stock parts on a truck; we source the right components for your stack and schedule the install once the estimate is approved.

Common Chimney Repair Problems We See in Alhambra Homes
- Cracked or shifted clay flue tiles you can’t see. Original clay tiles on 1920s – 1940s Alhambra chimneys commonly develop cracks and separated joints behind the stucco. A brush passes through clean; the stack is no longer gas-tight. That’s what the camera is for.
- Crumbling original chimney caps. On older bungalows between Main and Valley, the cap is often the original and it’s breaking down. That’s how palm fronds, twigs, and roof rats get into a flue – sometimes into a fireplace that’s been sealed or converted to gas.
- Damp winter creosote. Lightly used Alhambra fireplaces build creosote slowly, but a wet winter leaves it damp – and a damp, acidic creosote eats mortar and smells back into the room. Misread as a cleaning problem when the crown and flashing are the real leak.
- Spalling stucco and brick at the stack shoulder. The transition between the stucco breast and the brick stack is where water and freeze-free but damp winters do the most damage. Repointing there is usually a small job; letting it go usually isn’t.
A typical Alhambra job starts as a routine cleaning on one of these stucco-clad exterior chimneys and ends up as a camera inspection – because the flue footage tells the real story. A qualified local pro runs a Level 2 inspection, photographs and videos the flue and smoke chamber so you see the same evidence, then recommends only what the footage supports: a HeatShield or stainless liner for compromised tiles, mortar repointing and a new poured crown on the stack, and flashing repair where the roof tie-in has opened up. If the footage shows nothing wrong, we say so and you pay for the sweep.
Here’s the piece that surprises a lot of Alhambra homeowners: on a stucco-clad brick stack, a cracked flue tile can’t be fixed from the roof alone. The repair has to reconcile with the existing vintage stucco on the chimney breast, which changes both the scope of the work and the order we do it in – compared with a plain brick chimney elsewhere in the valley. That’s why we sequence repointing, crown work, and any liner install together on an Alhambra stack, rather than assuming the roof access tells the whole story.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Alhambra, CA
We don’t publish a price list, but we will give you real ranges so you know what ballpark to expect. A typical Level 2 inspection and cleaning in Alhambra runs $185 – $450, depending on the flue and whether there’s a fireplace insert or gas appliance in the way. Mortar repointing on a stucco-clad stack typically runs $350 – $1,100, depending on how much of the chimney is affected and how much stucco matching is involved. Chimney waterproofing usually runs $275 – $650. Flashing repair is commonly $300 – $850. A HeatShield liner resurfacing job is usually $1,600 – $3,800, and a stainless liner install runs higher. These are estimates; the written estimate you get before any work is booked is what sets the final price.
We Also Serve Cities Near Alhambra
Alhambra work often spills over to the surrounding blocks. We repair chimneys in South Pasadena, San Marino, El Sereno, and Highland Park, and the housing stock is similar enough that the same approach travels well – older stucco-clad stacks, original clay tiles, and the same evidence-first inspection. If you’re just outside Alhambra, call and we’ll tell you honestly whether we can reach you.
Serving Alhambra, CA – Our Local Coverage Area
We serve Alhambra and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Alhambra
Yes. An abandoned or converted fireplace can hide a blocked flue, a disconnected vent, or an appliance venting into a stack never designed for it. We run the camera up the flue and check the smoke chamber and the appliance connection before anything is swept. If the stack looks empty and sound, we’ll say so.
You see the camera footage. We photograph and video the flue and smoke chamber and show you the same evidence we’re working from – so a recommendation for a HeatShield resurfacing or a stainless liner is tied to a visible crack, separation, or gas-tightness failure, not a sales script. If the footage doesn’t support the repair, we don’t recommend it. Call (855) 506-8977 for a free estimate.
Because the original cap on an older Alhambra bungalow is usually crumbling or was never screened in the first place. On blocks between Main and Valley, the caps are often decades-old masonry that has broken at the corners and lost its screen. We replace it with a properly sized stainless cap from Gelco or Olympia Chimney – matched to the actual flue opening, with a screen that keeps out palm fronds, twigs, and roof rats.
It means grinding out the failed mortar joints, packing in new material matched to the original profile, and feathering the repair into the surrounding stucco so the chimney still reads as one finish. On a stucco-over-brick stack, the sequencing matters – repointing happens before waterproofing, and the crown is usually addressed in the same visit if it’s failed. A typical repointing job in Alhambra runs $350 – $1,100.
Yes – even in a fireplace that only sees occasional burns. Alhambra’s mild winters mean creosote builds slowly, but occasional hot burns can still form glossy, glazed creosote, and a wet winter leaves it damp, which corrodes mortar and produces that smoky smell in the room. Glazed creosote needs proper removal, not a brush pass. Call (855) 506-8977 for a free estimate and we’ll tell you exactly what’s in the flue.
What Happens When You Call
One call covers it: inspection, cleaning, and repair, with the same technicians handling it start to finish. We’ll book a sweep, run the camera, show you the footage, and quote the repair from what’s actually there. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 506-8977 for a free estimate.
Written by the team at Chimney Sweep Eagle Rock.